fix(opc_service): 修复S7地址解析和修订号循环计数问题

修复S7地址解析中未处理的类型别名问题，并添加偏移量有效性检查
实现修订号的循环计数功能（0..999），并添加操作成功日志

backend/opc_service.py

@@ -406,12 +406,14 @@ class OpcService:
         revision_address = target_cfg.get("setup_data_revision")
         if revision_address:
             try:
-                next_rev = self._read_s7_int32(
+                curr_rev = self._read_s7_int32(
                     endpoint=self.write_s7_endpoint,
                     address=revision_address,
                     rack=self.write_s7_rack,
                     slot=self.write_s7_slot,
-                ) + 1
+                )
+                # 循环计数：0..999，达到999后回到0
+                next_rev = 0 if curr_rev >= 999 else curr_rev + 1
                 await self.write_s7_value(
                     endpoint=self.write_s7_endpoint,
                     address=revision_address,
@@ -421,6 +423,10 @@ class OpcService:
                     rack=self.write_s7_rack,
                     slot=self.write_s7_slot,
                 )
+                self._log(
+                    f"Write setup_data_revision success (U{target_uncoiler}): "
+                    f"{curr_rev} -> {next_rev}, address={revision_address}"
+                )
             except Exception as exc:
                 self._log(f"Write setup_data_revision failed (U{target_uncoiler}): {exc}")
 
@@ -1114,8 +1120,29 @@ class OpcService:
         if area_part.startswith("DB"):
             area_part = area_part[2:]
 
-        area_code = area_part[:1]
-        offset_part = area_part[1:]
+        # Normalize aliases:
+        # X0.0 / B2 / W4 / D8 / DINT0 / INT4 / WORD6 / REAL8 / BYTE10
+        if area_part.startswith("DINT"):
+            area_code = "D"
+            offset_part = area_part[4:]
+        elif area_part.startswith("DWORD"):
+            area_code = "D"
+            offset_part = area_part[5:]
+        elif area_part.startswith("REAL"):
+            area_code = "D"
+            offset_part = area_part[4:]
+        elif area_part.startswith("INT"):
+            area_code = "W"
+            offset_part = area_part[3:]
+        elif area_part.startswith("WORD"):
+            area_code = "W"
+            offset_part = area_part[4:]
+        elif area_part.startswith("BYTE"):
+            area_code = "B"
+            offset_part = area_part[4:]
+        else:
+            area_code = area_part[:1]
+            offset_part = area_part[1:]
 
         bit_index = None
         if area_code == "X":
@@ -1129,6 +1156,8 @@ class OpcService:
         else:
             if "." in offset_part:
                 raise ValueError(f"Only X area may include bit index: {address}")
+            if not offset_part or not offset_part.lstrip("-").isdigit():
+                raise ValueError(f"Invalid S7 byte offset in address: {address}")
             byte_offset = int(offset_part)
 
         if byte_offset < 0: